In the embedded Linux environment (configured 2.4.25 on PowerPC) after a few hours I get the following kernel panic:
Oops: kernel access of bad area, sig: 11
NIP: C9471C7C XER: 20000000 LR: C0018C74 SP: C0198E20 REGS: c0198d70 TRAP: 0800 Not tainted
MSR: 00009030 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DEAR: C9876FFF, ESR: 00000000
TASK = c0197020[0] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
PLB0: bear= 0x48041040 acr= 0x00000000 besr= 0x00000000
PLB0 to OPB: bear= 0x00cc1000 besr0= 0x00000000 besr1= 0x00000000
GPR00: 00000000 C0198E20 C0197020 00000000 C016E494 000000C2 C01D0000 00000000
GPR08: C98701F0 C9876FFF 00008000 C768AE0F 24004022 1001B120 07FC9500 00000000
GPR16: 00000001 00000001 FFFFFFFF 007FFE00 00001032 00198EE0 00000000 C0004780
GPR24: C01D2F68 C01E0000 C0170000 C0170000 C01B0000 C9473870 00000000 C9473864
Call backtrace:
00000001 C0018C74 C0018A1C C0005E14 C0004780 C0022724 C0005D4C
C0005D60 C0002430 C01AE5BC C0002328
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
<0>Rebooting in 1 seconds...
cat / proc / modules:
CustomModule1 10556 4
CustomModule2 5488 0
CustomModule3 10240 1
fuse 35576 4
usb-storage 28468 0 (unused)
keybdev 3076 0 (unused)
mousedev 6116 0 (unused)
hid 17968 0 (unused)
input 6192 0 [keybdev mouse
ksyms -m:
Address Symbol Defined by
c9471000 (11k) [CustomModule1]
c9471b74 functionA [CustomModule1]
c947358c functionB [CustomModule1]
c9473580 functionC [CustomModule1]
...
I searched for help, but I could not find anything useful. I also wanted to "decode" the return line, but I don’t understand how ... the addresses do not match the addresses in System.map. Can someone explain to me how to find out about the error?
Thank you, Chris
source
share