All geek questions in one place

Unable to uninstall Java Card applet

I'm new to the Java map, but after some reading, my first Applet has worked pretty well ..... until today. I reworked and pasted the OwnerPIN object in my applet a bit. And now I can write the Applet once, but the second time the deletion no longer works. Here is my conclusion:

Java Card 2.2.2 Class File Converter, Version 1.3
Copyright 2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
mode_201
gemXpressoPro
enable_timer
establish_context
command time: 16 ms
card_connect
command time: 187 ms
select -AID A000000018434D00
command time: 78 ms
open_sc -security 1 -keyind 0 -keyver 0 -key 47454d5850524553534f53414d504c45 -keyDerivation visa2
command time: 328 ms
delete -AID  0102030405060708090000
delete() returns 0x80206985 (6985: Command not allowed - Conditions of use not satisfied.)
command time: 31 ms
delete -AID  01020304050607080900
delete() returns 0x80206985 (6985: Command not allowed - Conditions of use not satisfied.)
command time: 47 ms
get_status -element e0


List of applets (AID state privileges)
a000000018434d00 1 9e
a0000000620001 1 0
a0000000620002 1 0
a0000000620003 1 0
a0000000620101 1 0
a000000062010101 1 0
a0000000620102 1 0
a0000000620201 1 0
a0000000620209 1 0
a0000000620202 1 0
a000000018100109 1 0
a00000001810010b 1 0
a00000001810010a 1 0
a0000000030000 1 0
a000000018100106 1 0
a000000018100201 1 0
a000000018100101 1 0
a00000015100 1 0
a000000018100108 1 0
a0000000181001ff 1 0
a000000018100501 1 0
a000000018100502 1 0
a000000018100401 1 0
5365637572697479 1 0
a0000000035350 1 0
01020304050607080900 1 0
0102030405060708090000 7 0
command time: 187 ms
install -file mycap.cap -sdAID A000000018434D00 -nvCodeLimit 4096 -instParam 2265
install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of use not satisfied.)

update On request, parts of my code:

public class MyApplet extends Applet
{

   private static final byte MY_CLA = (byte)0xB0;

  ...
    private final static byte VERIFY_INS = (byte)0x40;
 ...
    private final static byte NEED_VERIFICATION_INS = (byte)0x47;
    private final static byte GET_INSTALL_PARAMS_INS = (byte)0x50;
    private final static byte GET_REMAINING_PIN_TRIES_INS = (byte)0x60;

    private final static byte PIN_TRY_LIMIT = (byte)0x03;
    private final static byte MAX_PIN_SIZE = (byte)0x08;

    // signal that the PIN verification failed
    private final static short SW_VERIFICATION_FAILED = 0x6300;
    private final static short SW_PIN_VERIFICATION_REQUIRED = 0x6301;

   ...
    private static byte[] testdata;
    private OwnerPIN m_pin;
    private byte[] m_array;
    private short m_offset;
    private byte m_length;

    private MyApplet(byte[] bArray, short bOffset, byte bLength)
    {
       ...
        m_pin = new OwnerPIN(PIN_TRY_LIMIT, MAX_PIN_SIZE);
        // m_array = bArray;
        // m_offset = bOffset;
        // m_length = bLength;
        register();
    }

    public boolean select()
    {
        if (m_pin.getTriesRemaining() == 0)
        {
            return false;
        }
        return true;
    }

    public void deselect()
    {
        m_pin.resetAndUnblock();
    }

    private void adminRest()
    {
        m_pin.resetAndUnblock();
        return;
    }


    private void getInstallParams(APDU apdu)
    {
        try
        {
            byte[] buffer = apdu.getBuffer();
            // inform the JCRE that the applet has data to return
            short le = apdu.setOutgoing();
            // set the actual number of the outgoing data bytes
            apdu.setOutgoingLength(((short)testdata.length));
            apdu.sendBytesLong(testdata, (short)0, (short)testdata.length);

        }
        catch (APDUException e)
        {
            // TODO Auto-generated catch block
        }
        catch (TransactionException e)
        {
            // TODO Auto-generated catch block
        }
        catch (ArrayIndexOutOfBoundsException e)
        {
            // TODO Auto-generated catch block
        }
        catch (NullPointerException e)
        {
            // TODO Auto-generated catch block
        }
    }

    /**
     * Get number of remaining pin tries
     * 
     * @param apdu
     */
    private void getPinTriesRemaining(APDU apdu)
    {
        try
        {
            byte[] buffer = apdu.getBuffer();
            // inform the JCRE that the applet has data to return
            apdu.setOutgoing();
            // set the actual number of the outgoing data bytes
            apdu.setOutgoingLength((byte)2);

            // write the PinTriesRemaining into the APDU buffer at the offset 0
            Util.setShort(buffer, (short)0, m_pin.getTriesRemaining());

            // send the 2-byte balance at the offset
            // 0 in the apdu buffer
            apdu.sendBytes((short)0, (short)2);
        }
        catch (APDUException e)
        {
            // TODO Auto-generated catch block
        }
        catch (TransactionException e)
        {
            // TODO Auto-generated catch block
        }
        catch (ArrayIndexOutOfBoundsException e)
        {
            // TODO Auto-generated catch block
        }
        catch (NullPointerException e)
        {
            // TODO Auto-generated catch block
        }

    } // end of getPinTriesRemaining method

    /**
     * Verification method to verify the PIN
     * 
     * @param apdu
     */
    private void verify(APDU apdu)
    {

        byte[] buffer = apdu.getBuffer();

        // receive the PIN data for validation.
        byte byteRead = (byte)(apdu.setIncomingAndReceive());

        // check pin
        // the PIN data is read into the APDU buffer
        // starting at the offset ISO7816.OFFSET_CDATA
        // the PIN data length = byteRead
        if (!m_pin.check(buffer, ISO7816.OFFSET_CDATA, byteRead))
        {
            ISOException.throwIt(SW_VERIFICATION_FAILED);
        }

    } // end of verify method

    /**
     * Installs the applet.
     *
     * @param bArray array with installation parameters.
     * @param bOffset offset into array.
     * @param bLength the length of the parameters.
     */
    public static void install(byte[] bArray, short bOffset, byte bLength)
    {
        testdata = new byte[bLength];
        Util.arrayCopy(bArray, (short)0, testdata, (short)0, bLength);
        new MyApplet(bArray, bOffset, bLength);
    }


    /**
     * Processes an incoming APDU.
     *
     * @param apdu the APDU.
     */
    public void process(APDU apdu)
    {

        byte l_transferredBuffer[] = apdu.getBuffer();
        // Get the CLA; mask out the logical-channel info.
        l_transferredBuffer[ISO7816.OFFSET_CLA] = (byte)(l_transferredBuffer[ISO7816.OFFSET_CLA] & (byte)0xFC);
        if ((l_transferredBuffer[ISO7816.OFFSET_CLA] == 0) && (l_transferredBuffer[ISO7816.OFFSET_INS] == (byte)(0xA4)))
        {
            ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
        }
        if (l_transferredBuffer[ISO7816.OFFSET_CLA] != MY_CLA)
        {
            ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
        }

        byte l_ins = l_transferredBuffer[ISO7816.OFFSET_INS];

      ...
        else if (l_ins == VERIFY_INS)
        {
            verify(apdu);
        }
        ...
        else if (l_ins == NEED_VERIFICATION_INS)
        {
            isNeedVerification(apdu, l_transferredBuffer);
        }
        else if (l_ins == GET_INSTALL_PARAMS_INS)
        {
            getInstallParams(apdu);
        }
        else if (l_ins == GET_REMAINING_PIN_TRIES_INS)
        {
            getPinTriesRemaining(apdu);
        }
        else
        {
            ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
        }
    }

    private void isNeedVerification(APDU apdu, byte[] buffer)
    {
        // The structure for the response request is
        // ---------------------
        // | response |
        // | 1 byte |
        // ---------------------
        getRequest(apdu, buffer);
        byte[] l_needVerificationResponse = new byte[1];
        boolean l_validated = m_pin.isValidated();
        if (l_validated)
        {
            l_needVerificationResponse[0] = 1;
        }
        else
        {
            l_needVerificationResponse[0] = 0;
        }
        apdu.setOutgoing();
        apdu.setOutgoingLength((short)l_needVerificationResponse.length);
        apdu.sendBytesLong(l_needVerificationResponse, (short)0, (short)l_needVerificationResponse.length);
    }

    private byte[] getRequest(APDU apdu, byte[] transferredBuffer)
    {
        short l_setIncomingAndReceive = apdu.setIncomingAndReceive();
        byte[] request = new byte[l_setIncomingAndReceive];
        for (short i = 0; i < request.length; i++)
        {
            short l_j = (short)(ISO7816.OFFSET_CDATA + i);
            request[i] = transferredBuffer[l_j];
        }
        return request;
    }
... 
}

Is my card blocked? I see that my AID is in state 7 ... what does this mean. Is this related to my OwnerPIN object?

Thank you for your help! Yang

+4
source share
2 answers

The problem line is this:

private static byte[] testdata;

, static . , Applet . ( ) , , , .

static, .

, AppletEvent:

public final class MyApplet extends Applet implements AppletEvent {

    private static byte[] testdata;
    ...

    //This method is called in the moment of uninstallation
    public final void uninstall() {
        testData = null; //release the reference --> testData can be GC
    }
    ...

}
+5

JavaCards, .

, GlobalPlatformPro. ( , Windows, gp.exe).

:

AID:

G:\BasicTestTools\SmartCardTools>gp -key 404142434445464748494a4b4c4d4e4f -list
AID: A000000151000000 (|....Q...|)
     ISD OP_READY: Security Domain, Card lock, Card terminate, Default selected, CVM (PIN) management

AID: 010203040503 (|......|)
     App SELECTABLE: (none)

AID: A0000001515350 (|....QSP|)
     ExM LOADED: (none)
     A000000151535041 (|....QSPA|)

AID: 0102030405 (|.....|)
     ExM LOADED: (none)
     010203040503 (|......|)

, AID, App, , AID, ExM, ().

0102030405 010203040503 - AID AID .

, :

, , , :

G:\BasicTestTools\SmartCardTools>gp -key 404142434445464748494a4b4c4d4e4f -delete 0102030405
Could not delete AID: 0102030405
TIP: Maybe try with --deletedeps
pro.javacard.gp.GPException: Deletion failed SW: 6985
        at pro.javacard.gp.GlobalPlatform.check(GlobalPlatform.java:1092)
        at pro.javacard.gp.GlobalPlatform.deleteAID(GlobalPlatform.java:867)
        at pro.javacard.gp.GPTool.main(GPTool.java:390)

:

  • .
  • ( ).

:

( -deletedeps, delete):

G:\BasicTestTools\SmartCardTools>gp -key 404142434445464748494a4b4c4d4e4f -delete 0102030405 -deletedeps

G:\BasicTestTools\SmartCardTools>gp -key 404142434445464748494a4b4c4d4e4f -list
AID: A000000151000000 (|....Q...|)
     ISD OP_READY: Security Domain, Card lock, Card terminate, Default selected, CVM (PIN) management

AID: A0000001515350 (|....QSP|)
     ExM LOADED: (none)
     A000000151535041 (|....QSPA|)

:

, . :

G:\BasicTestTools\SmartCardTools>gp -key 404142434445464748494a4b4c4d4e4f -install C:\NetBeansProjects\test2\dist\test2.cap

G:\BasicTestTools\SmartCardTools>gp -key 404142434445464748494a4b4c4d4e4f -list
AID: A000000151000000 (|....Q...|)
     ISD OP_READY: Security Domain, Card lock, Card terminate, Default selected, CVM (PIN) management

AID: 010203040503 (|......|)
     App SELECTABLE: (none)

AID: A0000001515350 (|....QSP|)
     ExM LOADED: (none)
     A000000151535041 (|....QSPA|)

AID: 0102030405 (|.....|)
     ExM LOADED: (none)
     010203040503 (|......|)

, , .

, ( 404142...4f )

, ( ) 0x6985, , . , key , :

G:\BasicTestTools\SmartCardTools>gp -key 00112233445566778899aabbccddeeff -list
pro.javacard.gp.GPException: STRICT WARNING: Card cryptogram invalid!
Card: 7F9CFF3D61110EF2
Host: 9EE2CDBF4A088053
!!! DO NOT RE-TRY THE SAME COMMAND/KEYS OR YOU MAY BRICK YOUR CARD !!!
        at pro.javacard.gp.GlobalPlatform.printStrictWarning(GlobalPlatform.java:184)
        at pro.javacard.gp.GlobalPlatform.openSecureChannel(GlobalPlatform.java:515)
        at pro.javacard.gp.GPTool.main(GPTool.java:371)

, key. 10 , .

+2

Source: https://habr.com/ru/post/1608829/

More articles:


All Articles