My phone cannot be detected in eclipse for verification

Question

Before asking my question, I looked at several threads that share the same problem as me, and tried all this solution without success. I am from Malaysia. I cannot find that my device is detected to check my application on my phone. I checked the Unknown Sources and USB Debugging options on my phone. I am using eclipse. But if I create a random virtual device, my application may work there.

Ok, so I use Motorola Atrix 2. And I use Windows 8 Pro 64 bit

I downloaded the Android SDK: http://www.motorola.com/sites/motodev/us-en/motodev_lp.html

I also tried to download the latest driver without success. I also added this line in the android manifest: debuggable = "true" I tried both as a mass storage device and as a media transfer device. I would be grateful for any help, because at the moment I can’t move forward in developing an Android application, and this saddens me. :( I have attached an image in which my Android phone should be detected in the window, but as you can see, no. https://pbs.twimg.com/media/BJu1XSgCYAEGCUd.jpg:large

Answer 1

go to / your -android-sdk-directory / platform-tools using the command line.

type

adb kill-server adb start-server adb devices 

n sees if ur device is detected now or not ...

Note. If you are using a Linux machine then put ./ before adb

Answer 2

Install the correct drivers for your adb devices from the Android-SDK archive or Motorola site .

If you are on a Windows machine, go to the device manager , find your device and select the driver folder for it.

Answer 3

Open windows os explorer window, look at the process, if two or more processes are holding your adb, try to exit the process

Answer 4

Make sure that android: minSdkVersion is less than or equal to the version running on the phone. If it is higher, it will not appear in the "Select an Android device" section.

Install and run programs / drivers with administrator rights.

Answer 5

Have you installed Motorola Device Manager?

When debugging Samsung and HTC devices, I got it to work by installing such software (for synchronizing devices with a computer).

Answer 6

Download from the following: Universal ABD Driver

and install it. Before installation, make sure that your device is connected to the network, and make sure that you are in USB debugging mode in the phone settings.