I am trying to configure this machine: https://github.com/ByteInternet/hypernode-vagrant
When I do vagrant up, I get the following error:Timed out while waiting for the machine to boot.
Full error context:
$ vagrant up
Bringing machine 'hypernode' up with 'virtualbox' provider...
==> hypernode: Will use PHP 7. If you want PHP 5.5 instead change the php version in local.yml.
==> hypernode: Checking if box 'hypernode_php7' is up to date...
==> hypernode: Clearing any previously set forwarded ports...
==> hypernode: Clearing any previously set network interfaces...
==> hypernode: Preparing network interfaces based on configuration...
hypernode: Adapter 1: nat
hypernode: Adapter 2: hostonly
==> hypernode: Forwarding ports...
hypernode: 80 (guest) => 8080 (host) (adapter 1)
hypernode: 3306 (guest) => 3307 (host) (adapter 1)
hypernode: 22 (guest) => 2222 (host) (adapter 1)
==> hypernode: Running 'pre-boot' VM customizations...
==> hypernode: Booting VM...
==> hypernode: Waiting for machine to boot. This may take a few minutes...
hypernode: SSH address: 127.0.0.1:2222
hypernode: SSH username: vagrant
hypernode: SSH auth method: private key
Timed out while waiting for the machine to boot. This means that
Vagrant was unable to communicate with the guest machine within
the configured ("config.vm.boot_timeout" value) time period.
If you look above, you should be able to see the error(s) that
Vagrant had when attempting to connect to the machine. These errors
are usually good hints as to what may be wrong.
If you're using a custom box, make sure that networking is properly
working and you're able to connect to the machine. It is a common
problem that networking isn't setup properly in these boxes.
Verify that authentication configurations are also setup properly,
as well.
If the box appears to be booting properly, you may want to increase
the timeout ("config.vm.boot_timeout") value.
When I boot the virtual machine manually, I see that the network interaction does not work as it should. No connection. When I change the settings of a virtual machine to a bridged network, the network works. But the tramp is configured as NAT. So any changes that I make to the settings or to the stray file seem to be coming back.
Vagrant 1.9.3, 1.9.2 1.9.0 . Virtualbox 5.1.18. , "NAT" ( , ):
00:00:00.575454 SUP: Loaded VMMR0.r0 (C:\Program Files\Oracle\VirtualBox\VMMR0.r0) at 0xfffff80c897b0000 - ModuleInit at fffff80c897d3590 and ModuleTerm at fffff80c897d3a80 using the native ring-0 loader
00:00:01.681747 Driver = "NAT" (cb=4)
00:00:01.962037 SUP: Loaded VBoxDDR0.r0 (C:\Program Files\Oracle\VirtualBox\VBoxDDR0.r0) at 0xfffff80c898d0000 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000 using the native ring-0 loader
00:00:02.196495 NAT: Guest address guess set to 10.0.2.15 by initialization
00:00:02.204465 NAT: DNS#0: 192.168.178.1
00:00:02.271317 NAT: Failed to redirect TCP 127.0.0.1:2222 -> 0.0.0.0:22 (Unknown error)
00:00:02.271732 NAT: Failed to redirect TCP 0.0.0.0:3307 -> 0.0.0.0:3306 (Unknown error)
00:00:02.272033 NAT: Failed to redirect TCP 0.0.0.0:2200 -> 0.0.0.0:80 (Unknown error)
00:00:09.976199 NAT: Link up
00:00:39.428974 NAT: DHCP offered IP address 10.0.2.15
00:00:39.429404 NAT: DHCP offered IP address 10.0.2.15
00:03:02.167191 NAT: DHCP offered IP address 10.0.2.15
00:03:02.167820 NAT: DHCP offered IP address 10.0.2.15
00:07:58.531621 NAT: Zone(nm:mbuf_cluster, used:0)
00:07:58.532221 NAT: Zone(nm:mbuf_packet, used:0)
00:07:58.532232 NAT: Zone(nm:mbuf, used:1)
00:07:58.532419 NAT: Zone(nm:mbuf_jumbo_pagesize, used:0)
00:07:58.532961 NAT: Zone(nm:mbuf_jumbo_9k, used:0)
00:07:58.533255 NAT: Zone(nm:mbuf_jumbo_16k, used:0)
00:07:58.533424 NAT: Zone(nm:mbuf_ext_refcnt, used:0)
00:07:58.536529 Changing the VM state from 'DESTROYING' to 'TERMINATED'
?
Vagrant, , - :
- Virtualbox 5.0.18
- Virtualbox 5.0.20
- Virtualbox 5.0.36
- Vagrant 1.9.3
, . , , .
, Windows 7 . , - , , , Windows.
2: , , , ? BIOS.
3: ssh -v 127.0.0.1 -p 1222 , . SSH. sshd service status.
$ ssh -v 127.0.0.1 -p 1222
OpenSSH_7.3p1, OpenSSL 1.0.2k 26 Jan 2017
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Connecting to 127.0.0.1 [127.0.0.1] port 1222.
debug1: connect to address 127.0.0.1 port 1222: Connection refused
ssh: connect to host 127.0.0.1 port 1222: Connection refused
4: - -IP .